Tempe Water Heater
Repair & Installation

Water heater repairs do cost money but are necessary. Average repairs could range from $200-$500 depending on the water heater repairs needed. For example, if your water heater stops working, it could be that the heating element may need to be replaced or you may need a new thermocouple. A new heating element costs between $20-$60 and a new thermocouple can cost between $40-$60 on average. The average labor rates for plumbers are around $70 per hour. So for a 3 hour repair job you are looking at $200+ plus parts. While this may seem like a sizable investment, trying to repair your water heater yourself is hazardous and could result in you spending hundreds on a wrong part, faulty installation, or worse, needing to spend thousands on a brand new water heater due to DIY errors! Hiring a plumber provides you the peace of mind knowing that things were done correctly.

The most common problems with water heaters are usually malfunctions in the cooling system. These malfunctions are often caused by lack of maintenance or improper installation. For example, if your heater is installed where it is subject to freezing temperatures, the coolant inside could freeze, causing your heater to malfunction.

Wonder why do water heaters break down? Water heaters are usually powered by either electricity or natural gas. Natural gas water heaters may be less expensive to run in the long term because they use natural gas, which is typically cheaper than electricity, but these also have a few more mechanical parts than electric models and therefore are slightly more prone to breaking down. For example, if there is no pilot light lit when the heater is running it will malfunction because the thermocouple that controls the ignition process will overheat and shut off safety features stopping the burner from lighting larger flames. If your immersion heater has an anti-scalding device fitted then it can prevent you from getting burned when using hot water, but it’s important to know how it works and what to look out for. You should check that the anti-scalding device is working by turning on your hot tap and running cold water through the faucet closest to where the device is fitted. If you feel a sudden change in temperature, then you most likely need a new anti-scalding device installed because yours might be faulty.

In addition to these malfunctions, gas water heaters may also have problems with carbon monoxide emissions if they are not cleanly burning fuel (i.e., using combustion air). Water heater manufacturers recommend having their products serviced once each year by a professional service person who will keep your appliance clean properly adjusted so that it performs optimally.

It could be any number of things that would cause a hot water heater to stop working. Some reasons for this could be the onset of cold weather (leading an increase in demand for hot water, too little fuel, air in gas lines), age and/or defective parts. The thermostat could malfunction, the gas supply to the pilot light may have run out or been shut off (if the heater has a standing pilot) or there could be too much sediment in the bottom of the tank. Although rare, moving water could also cause a hot water heater to stop working as well as debris in pipes leading from pump that heats up water.

If you’re not so confident in your DIY skills, consider hiring a plumber to install your water heater. When you’re already thinking about hiring a plumber to install your water heater, you may already know that this is one of the most difficult parts about owning a water heater. Because of how complicated and strenuous this process can be, it’s usually best to leave it up to the professionals.

If you want to learn more reasons why you should hire a plumber for your installation or just some benefits in general, continue reading below!

The Right Tools For The Job

One reason that often leads people to consider hiring a plumber is because they don’t own the right tools. Although possible, installing your water heater without the proper knowledge and tools can lead to serious injury. This is especially true if these are your first times installing this product. If you don’t have the right tools for the job, not only will it be difficult to perform your installation properly, but it may also make the process itself more strenuous and complicated as well.

Hiring a plumber is beneficial because they typically arrive with all of these necessary tools already in tow, ensuring that the installation process goes as smoothly and quickly as possible.

Experience And Training For The Job

In addition to having all of the proper tools to get the job done, hiring a plumber also ensures that you’re getting someone with experience and training. Although water heater installations are relatively simple if you know what you’re doing, it’s still quite an undertaking since there are tons parts involved. Even experienced do-it-yourselfers have gotten in over their heads with this project. That’s why it’s important to leave the job up to someone who knows what they’re doing from the get-go.

Aside from knowing exactly what they’re doing and having proper tools for the job, they’ll also be able to offer better support throughout installation process as well. Knowing how to use your water heater once it’s properly installed is just as important as installing it correctly in the first place, so you want someone with experience on standby at all times!

Trying To Do It Yourself Can Be A Waste Of Time And Money

Although many people attempt DIY home projects when there are things that need fixing, some repairs should not be attempted by amateurs. This is especially true if the project involves major renovations, such as installing a water heater. Rather than risk wasting both your time and money on something that goes horribly wrong, you should always leave it up to professionals who know exactly what they’re doing every step of the way.

Hiring a plumber for your installation isn’t just beneficial because their experience allows them to get the job done quickly and efficiently without any problems along the way. It’s also beneficial because they’ll likely be able to finish this job in no time! This means that you’ll be able to save both time and money since you won’t have to constantly pay someone else for help while they struggle with basic tasks involved.